Updated December 2020
These kits are exact copies of the infamous SW40+, SW30+, SW20+, and SW80+ kits that were provided by Dave Benson of Small Wonder Labs. Dave has graciously allowed us to carry on his legacy by making this kit available at almost the same price, over 20 years ago. Midway has been selling these kits throughout the U.S. and all over the world. Germany, Spain, New Zealand, Japan, Australia, Brazil, Argentina, Canada, France, England.
Why should you consider purchasing and using the ME series QRP rigs when there are so many other modern ones with lots more features? The ME series rigs are simple, thru hole boards with easy to find parts. There is no microprocessor or surface mount parts that are hard to find and replace. The sensitivity is unsurpassed. The circuitry is simple to understand. You can add many mods to it such as frequency display, RIT, keyer, 10 turn tuning, speaker amp, zero beat indicator, PWR/SWR meter, antenna tuner, etc. The low receiver current drain is excellent for solar operation, emergency communications, and portable use.
See full Specifications here
If you purchase the "Complete kit", you will receive all the parts, enclosure, connectors, and wire as shown in the three pictures below.
This section is to provide information, documentation, and supplements to the ME series QRP rigs.
Latest ME40+ assembly manual in PDF
Latest ME80+ assembly manual in PDF
Latest ME30+ assembly manual in PDF
Latest ME20+ assembly manual in PDF
HELP! I can't tune in the right frequencies
EIA resistor color code
Picture of ME40+ wound toroids
Component identification explanation
Addendums - Please read!
External Frequency Display
20 meter transformer mod
Hard to find parts
Modifications - Submit your pictures, ideas, and mods you wish to share
Feedback - email us your feedback both good and bad. We will post it here. We want to hear from all owners. We will strive to make this kit even better or post your mods.
Links to the ME+ Series or SW40+ QRP radios and accessories. Many good hot links!
Circuit board release V1.0 as of Feb 5, 2018
What's new in board version 1.1 released August 2018
Picture of assembled board (click on board to view a high resolution image to compare to your board)
The ME+ Series "board kit only" comes with circuit board, bags of parts and assembly manual for $60.00 plus shipping, Paypal preferred. The "board kit only" DOES NOT include the enclosure. You must provide a suitable custom enclosure, front panel pots and knobs, and rear panel connectors or order them from below.
The "complete kit" includes everything as shown on the three pictures at top of page.
Foreign orders will have appropriate shipping and customs charges added, typically $26.50 but recently rising. For foreign orders it's quicker but not cheaper to use ebay and tracking is better. Please specify which band you desire.
|"Complete kit" with enclosure. Everything but solder. (specify band 80,40,30,20)||$92.95|
|"Board kit only", all board parts and circuitboard, no enclosure, no pots or connectors (specify band)||$60.00|
|Bare circuitboard only||$10.95|
|5 prewound toroids (specify band)||$10.95|
|5 toroids and band specific wire (specify band)||$6.95|
|*Rear panel parts (jacks and connectors)||$9.95|
|*Front panel parts (knobs and pots)||$10.95|
|Complete enclosure and all above * items, including rubber feet and standoffs||$37.95|
|3 SA602 or SA612 pre-tested mixer||$7.95|
|2SC2078 pre-tested RF output transistor||$3.95|
|5 matched crystals (specify band)||$6.95|
|3 42IF123 transformers||$11.85|
|1SV149 varicap diode||$1.95|
|Large and small legacy knobs||$3.95|
|2SC2166 pre-tested RF output transistor||$3.95|
Details on hard to find parts are listed here: Hard to find parts
Please contact Midway Electronics by email for orders.
Occasionally we have fully assembled units available. Please contact us directly via email and we will let you know what's available if any.
Shipping will be USPS Priority 2-3 Days within the U.S. Foreign orders vary from US$16.00 to US$32.00 depending on country.
All prices subject to change. Shipping prices for U.S. orders only. US Priority mail is currently $8.40, but this seems to go up every few months.
Ordering and contact information: email: midway7726 (at)
This email is also used for Paypal
No B.S. Warranty
If you feel this project is beyond your scope you can return it for a full refund.
If you started assembling this board and you feel you are incapable of finishing it you can return it for a full refund.
If you build this radio and you cannot get it to perform to specifications you can return it for repair. If we find it is a component fault there will be no charge and we will return it to you fully functioning as to specifications, postage paid.
If we find there was a component or components put in wrong, backwards, or damaged by you or if there was improper assembling or soldering techniques or poor soldering, or shorts, depending on condition there may be a repair charge (depending upon issue) plus $8.50 shipping in the U.S.
If you are just unsatisfied and wish to return kit in good condition, we will refund the total cost paid by you less shipping.
We want only satisfied customers.
If you own a Small Wonder Labs SW40+, SW30+, SW80+, or SW20+ and have problems troubleshooting it, or need it set up for a different frequency span, or are missing parts, we will be happy to supply or repair your SW unit for a nominal fee. Please contact Midway for details.
|Midway has been trying its best to keep the price of this kit to pre-Year2000 levels. This has been hard on our profit margin. Increasing costs for components, increasing Ebay fees, increasing Paypal expenses, and new Paypal policies have dug even deeper into our profits which is very little. As of this date we can honestly say we have never charged for replacements for defective or damaged components including shipping. As our policy states, "we only want satisfied customers".|